BigNavBar.gif (5968 bytes)

Delhead.GIF (1345 bytes)

The safe, professional delivery of a spa is crucial - for you the customer and us as the company you've trusted to do business with. We take delivering spas seriously, and there is no better crew than ours to see to that.

The pictures below give an idea of the basic steps, but much more planning and thinking goes on behind the scene to ensure success. Don't worry, you're in good hands!
NOTE: All new Watkins-made spas come from the factory with protective wrapping. The spa shown here has obviously had that wrapping removed because it was a demo or traded-in unit. 
del1.jpg (4283 bytes)
The spa arrives
on a flatbed pickup,
ready for delivery.
del2.jpg (3704 bytes)
This spa,
weighing 880 lbs,
is pulled off the truck.
del4.jpg (4063 bytes)
Gently laid on it's side,
foam pads are laid
down for protection.
del5.jpg (4190 bytes)
Carefully tipped up
by all three, one man
readies the dolly.
del6.jpg (4181 bytes)
The spa dolly is
carefully positioned
underneath for balance.
del7.jpg (3915 bytes)
The spa is laid
on the dolly then
tested for proper seating.
del8.jpg (5043 bytes)
The spa starts its
journey towards it's
final resting place.
del9.jpg (4622 bytes)
Lengths of plywood
are laid down across
lawns and dirt.
del10.jpg (4784 bytes)
Overhead clearance
must be watched
at all times.
del12.jpg (4156 bytes)
The spa is laid down
at the customer
designated site.
del13.jpg (3894 bytes)
Final squaring
and adjusting is done.
del14.jpg (4106 bytes)
A beautiful spa in a beautiful backyard!
spbutton.gif (5520 bytes)

home | about us | contact us | new spas | refurbished | finance | supplies | customer area
© 1999 Inland Empire Hot Spring Spas, Inc. All Rights Reserved